Car Alarm System Security Vibration alarm Ignition Engine Start Push Button Remote C8. One key start Remote start. Oil pump testing Horn tip. Keyless entry Induction lock car. Mute lock the car The alert indicator.
Flash output Remote control tail box. Foot brake detection The door to detect. Dual path control Original car upgrade. 1Manual operation shut (manual lock the car). Operation: short press remote shut, the car locked and the lights flash horns 1 at a time.Note: the manual lock the car when should stand in the induction distance, otherwise the door will open automatically after the lock the car. Operation: short press unlock button once, the car will immediately unlock, lights flashing three times at this time. Note: manual unlock after the horn is not ring, and only three flash lights, pay attention to when using. 3Remote control to open the tail box operation (tail box mode). The remote control to open the trunk mode: long press unlock button for 5 seconds to open the trunk. 4Remote control car operation (vehicle model). Find car model: short press for the remote control car keys (middle) can be 15 seconds for the car. 5 Remote start and remote flameout operation (long started in the remote control). Remote start oper ation: when the manual or automatic induction makes the car after car anti-the ft lock into the state, long press 5seconds (car keys) don' t let go, the car will automati cally.
Into the remote start mode, remote start after the success of the operation, after the success of. The remote start horns, 2 light shining 2 times. Remote startup will first gear (manual) to hang in the neutral position.After the success of the remote start the car will have 15 minutes to run regularly , shut down after 15 minutes. Remote flameout operation: when want t o remote flameout vehicles in 15 minutes, is long in search of the remote control car key for 5seconds don' t let go, shut down after the vehicle automatic into the securily state. 6Induction shut + unlock operation (induction open close). Operation: when, take the remote control out of the car will automatically lock the car approached the car will automatically unlock. 7The use of the dual control instructions (dual control).
Description: 6 line control can direct welding the original car remote control; 2 line control can control the original car. 8Car emergency transport instructions (emergency). Operation: when the two remote control of the car after the lost or damaged, now want to vehicles according to the following operation method, using keys to open doors, long pres remove switch for 5senconds to remove sencurity. 9Remote learning instructions (remote control code). Operation : under the lift its state of guard against theft , short press the red to code switch 1seconds after let go , the long turn signal light , short press unlock button once again.
10 Power saving mode (power saving mode). In the host system to guard against theft w ith in 48 hours, if no remote control operation with in fourty- eight hours, 48 hour s after the system will automati cally cancel the automatic induction mode, cancel induction mode can only be used after lifted manually, press the remote control to switch lock anti -theft , etc. 1 1The function of the oil pump test line (pump). 2Remote start oil pump line don't meet also does not start normal remote control, be sure to keep in mind.
Remote start operation (special considerations). Note 1: manual models in remote startup must GuaKongDang, otherwise don't use remote start function. Note 2: the remote host will be 15 minutes after start the countdown timer, press the lock key regularly to cancel. Note 1: Remote startLong press the remote controlMiddle button 5secondsDepending on the remote control button position.
Note2:Sensing modeOpen the dashboardAt the same time short press(lock+unlock)Can be open or closed. Note3Wash the car modelOpen the dashboardAt the same time short presslock+middle buttonCan be open or closed. Note 4: the tail box model: long press (unlock button) for 5 seconds to open the trunk, depending on different remote controller button position. Note 5: dual control: B host has 2 road central, function, all the way to 2 line, the other is 6 line all the way , 6 wire welding can remote control. Note 6: the vibration alarm: B host have vibration function, when the security state of illegal motor car , speakers will output report to the police.1 x Car engine start buttonHost. 1 x 6P output cable. 2 x Smart remote control. All items will be checked before packing.
All items are new and of high quality. We will reply you within 24- 48 hours. The item "Car Keyless Entry Engine Start Vibration Alarm System Push Button Remote Starter" is in sale since Tuesday, September 19, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mouldings & Trim".
The seller is "chunlianzha_8" and is located in CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.